Cisco SF350-24MP 24-port 10/100 Max PoE Managed Switch
Thiết bị chuyển mạch mạng Switch Cisco SF350-24MP-K9-EU dòng sản phẩm nổi bật trong phân khúc Switch Cisco 350 Series là sự lựa chọn, giải pháp quản lý và bảo mật thích hợp với các doanh nghiệp vừa và nhỏ hiện nay.
Cisco SF350-24MP-K9-EU cung cấp bộ các tính năng cải thiện tính khả dụng của các ứng dụng kinh doanh quan trọng và bảo vệ thông tin nhạy cảm tối ưu hóa băng thông mạng giúp cung cấp thông tin hiệu quả hơn.
Bộ chuyển mạch Switch Cisco SF350-24MP-K9-EU được thiết kế với 24Port RJ45 trên đường truyền băng thông tốc độ 10/100Mbps. Cùng với đó là 2 x 10/100/1000 cổng, 2 x combo Gigabit SFP khác biệt với các loại Switch khác bởi nguồn điện PoE+ cung cấp điện năng 382W mang đến giải pháp sử dụng năng lượng hiệu quả.
Switch SF350-24MP-K9-EU có kích thước chiều rộng 17,3 in, chiều sâu 10.1 in và chiều cao 1,8 in với mức cân nặng 7,87 lbs là loại lắp rack vô cùng tiện lợi trong việc sử dụng.
Đặc điểm nổi bật của Switch Cisco SF350-24MP-K9-EU
Bộ đệm gói 12MB, hỗ trợ Danh sách điều khiển truy cập (ACL), Kiểm soát bão đa hướng, Chất lượng dịch vụ (QoS).
Hỗ trợ giao thức cây Spanning nhanh (RSTP), hỗ trợ giao thức Spanning Tree (STP), hỗ trợ Syslog,Hỗ trợ giao thức truyền file nhỏ (TFTP).
Kiểm soát bão Unicast, hỗ trợ VLAN, xếp hàng có trọng số Round Robin (WRR), nâng cấp firmware, điều khiển Broadcast Storm, chuyển mạch lớp 2, chuyển mạch lớp 3,port mirroring, hỗ trợ DHCP, hỗ trợ DiffServ, phòng chống tấn công DoS, IGMP snooping, hỗ trợ IPv6, hỗ trợ Jumbo Frames, MLD snoopingMLD snooping.
Tiêu chuẩn tuân thủ IEEE 802.1D, IEEE 802.1Q, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE 802.1p, IEEE 802.1, IEEE 802.1w, IEEE 802.1x,IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3az3az3az
Thông số kỹ thuật Switch Cisco SF350-24MP-K9-EU
| Model | SF350-24MP-K9-EU |
| Performance | |
| Switching capacity and forwarding rate | Capacity in Millions of Packets per Second (mpps) (64-byte packets): 9.52 |
| All switches are wire speed and nonblocking | Switching Capacity in Gigabits per Second (Gbps): 12.8 |
| Jumbo frames | Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces |
| MAC table | Up to 16K (16384) MAC addresses |
| USB slot | For file-management purposes |
| Layer 2 Switching | |
| Spanning Tree Protocol | Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default 8 instances are supported Multiple Spanning Tree instances using 802.1s (MSTP) |
| Port grouping | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 8 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
| VLAN | Support for up to 4096 VLANs simultaneously Port-based and 802.1Q tag-based VLANs MAC-based VLAN Management VLAN Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN Unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control devices |
| Multicast TV VLAN | Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs (also known as MVR) |
| Q-in-Q VLAN | VLANs transparently cross a service provider network while isolating traffic among customers |
| Other | GVRP/GARP, UDLD, DHCP, IGMP, IGMP Querier, HQL booking, Loopback Detection, Jumbo frames |
| Layer 3 | |
| IPv4 routing | Wirespeed routing of IPv4 packets |
| Up to 1K static routes and up to 128 IP interfaces | |
| IPv6 routing | Wirespeed routing of IPv6 packets |
| Classless Interdomain Routing (CIDR) | Support for CIDR |
| Layer 3 Interface | Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface |
| DHCP relay at Layer 3 | Relay of DHCP traffic across IP domains |
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP packets |
| DHCP Server | Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options |
| Security | |
| Secure Shell (SSH) Protocol | SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported |
| Secure Sockets Layer (SSL) | SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch |
| IEEE 802.1X (Authenticator role) | 802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X Dynamic VLAN assignment |
| Web-based authentication | Web based authentication provides network admission control through web browser to any host devices and operating systems |
| STP Bridge Protocol Data Unit (BPDU) Guard | A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port |
| STP Root Guard | This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes |
| DHCP snooping | Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers |
| Support | IP Source Guard (IPSG), IP/MAC/Port Binding (IPMB), Secure Core Technology (SCT), Secure Sensitive Data (SSD), Layer 2 isolation Private VLAN Edge (PVE) with community VLAN |
| Port security | The ability to lock source MAC addresses to ports and limits the number of learned MAC addresses |
| RADIUS/TACACS+ | Supports RADIUS and TACACS authentication. Switch functions as a client |
| Storm control | Broadcast, multicast, and unknown unicast |
| RADIUS accounting | The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session |
| DoS prevention | Denial-Of-Service (DOS) attack prevention |
| ACLs | Support for up to 512 rules Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag, time-based ACLs supported |
| Quality of Service | |
| Priority levels | 8 hardware queues |
| Scheduling | Strict priority and Weighted Round-Robin (WRR) Queue assignment based on DSCP and class of service (802.1p/CoS) |
| Class of service | Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS |
| Power over Ethernet (PoE) | |
| 802.3af PoE, 802.3at PoE+, and 60W PoE power are delivered over any of the RJ-45 ports within the listed power budgets | Switches support 802.3at PoE+, 802.3af, 60W PoE, and Cisco prestandard (older) PoE. Maximum power of 60W to any 10/100 or Gigabit Ethernet port for PoE+ supported devices and 15.4W for PoE supported devices, until the PoE budget for the switch is reached. The total power available for PoE per switch is as follows: Power Dedicated to PoE: 375W Number of Ports That Support PoE: 24 |
| PoE powered device and PoE passthrough | In addition to AC power, compact switch models can work as PoE powered devices and be powered by PoE switches connected to the uplink ports. The switch can also pass through the power to downstream PoE end devices if required Maximum of 60W can be drawn per uplink port if the peer PoE switch supports 60W PoE. When multiple uplink ports are connected to PoE switches, the power drawn from these ports is combined When AC power is connected and functioning properly, it will have priority over the PoE powered device function. The PoE powered device function will then act as a backup power source to the AC power. The PoE powered device function will be the primary power source for the switch if AC power is not connected |
| Green Power (Mode) | Energy Detect |
| System Power Consumption | 110V=29.2W 220V=28.3W |
| Power Consumption (with PoE) | 110V=238W 220V=233W |
| Heat Dissipation (BTU/hr) | 1333.0 |
| Can Switch Be Powered with Uplinks | 2 SFP slots, 2 Gigabit Ethernet |
| Total System Ports | 24 Fast Ethernet + 4 Gigabit Ethernet |
| RJ-45 Ports | 24 Fast Ethernet |
| Combo Ports (RJ‑45 + SFP) | 2 Gigabit Ethernet combo + 2 SFP |
| Buttons | Reset button |
| Cabling type | Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T |
| LEDs | System, Link/Act, PoE, Speed, LED power saving option |
| Flash | 256 MB |
| CPU memory | 512 MB |
| Packet buffer | All numbers are aggregate across all ports as the buffers are dynamically shared: 12 Mb |
| Environmental | |
| Dimensions | 440 x 44 x 257 mm |
| Weight | 4.12 kg |
