Quick Specs
Table 1 shows the Quick Specs.
| Product Code | WS-C3850-48F-L |
| Enclosure Type | 1 RU |
| Feature Set | LAN Base |
| Network SFP uplink module selection | C3850-NM-4-1G
C3850-NM-2-10G C3850-NM-4-10G |
| Ports | 48 x 10/100/1000 ports with PoE+ |
| Available PoE Power | 800W |
| Maximum stacking number | 9 |
| Stack bandwidth | 480 Gbps |
| Forwarding Performance | 130.95 Mpps |
| Switching Capacity | 176 Gbps |
| RAM | 4 G |
| Flash Memory | 2 G |
| Dimensions | 44.5 cm x 48.8 cm x 4.45 cm |
| Package Weight | 17.49 Kg |
Product Details
Figure 1 shows the front panel of the WS-C3850-48F-L with a blank module installed.
Note：
① Mode button ② Status LEDs ③ USB mini-Type B (console) port ④ USB Type A storage port ⑤ 48 * 10/100/1000 Ethernet ports
⑥ Network SFP uplink module slot
· The status LEDs include STAT (status), DUPLX (duplex), SPEED, STACK, SYST (system), ACTV (active) PoE and S-PWR (Stack Power).
· The switch supports one hot-swappable network module that provides uplink ports to connect to other devices. The switch should only be operated with either a network module or a blank module installed.
Figure 2 shows the back panel of the WS-C3850-48F-L.
Note：
① Ground connector ② CONSOLE (RJ-45 console port) ③ Fan modules ④ MGMT port ⑤ StackWise port connectors
⑥ StackPower connectors ⑦ Power supply modules
Figure 3 shows the StackWise-480 and StackPower connectors.
LAN Base feature set can only stack with other Catalyst 3850 Series LAN Base switches.
The Modules, Licenses and Accessories
Table 2 shows some modules, licenses and accessories of this switch.
| Models | Description |
| C3850-NM-4-1G | Cisco 3850 Series 4 x 1GE Network Module |
| C3850-NM-2-10G | Cisco 3850 Series 2 x 10GE Network Module |
| C3850-NM-4-10G | Cisco 3850 Series 4 x 10GE Network Module |
| L-C3850-48-L-E | C3850-48 LAN Base to IP Services Electronic RTU License |
| L-C3850-48-L-S | C3850-48 LAN Base to IP Base Electronic RTU License |
| PWR-C1-1100WAC | Cisco 3850 Series Power Supply 1100W AC |
| PWR-C1-1100WAC/2= | Cisco 3850 Series Secondary Power Supply 1100W AC Config 1 Secondary Power Supply |
| CAB-SPWR-30CM= | Catalyst 3750X and 3850 Stack Power Cable 30 CM |
| CAB-SPWR-150CM | Catalyst 3750X and 3850 Stack Power Cable 150 CM |
| STACK-T1-50CM= | Cisco StackWise-480 50cm stacking cable for Cisco Catalyst 3850 series switch |
| STACK-T1-1M= | Cisco StackWise-480 1m stacking cable for Cisco Catalyst 3850 series switch |
Compare to Similar Items
Table 3 shows the comparison between WS-C3850-48F-S and WS-C3850-48F-L.
| Models | WS-C3850-48F-S | WS-C3850-48F-L |
| Feature Set | IP Base | LAN Base |
| Network SFP uplink module | C3850-NM-4-1G
C3850-NM-2-10G C3850-NM-4-10G |
C3850-NM-4-1G
C3850-NM-2-10G C3850-NM-4-10G |
| Ports | 48 * 10/100/1000 Ethernet ports with PoE+ | 48 * 10/100/1000 Ethernet ports with PoE+ |
| Available PoE Power | 800W | 800W |
WS-C3850-48F-L Specification
WS-C3850-48F-L Specification |
|
|
model info: |
WS-C3850-48F-L |
|
enclosure type |
Rack-mountable – 1U |
|
Ports |
48 x 10/100/1000 (POE+) |
|
Network management Interface |
● Ethernet management port: RJ-45 connectors, 4-pair Cat-5 UTP cabling |
|
Available PoE Power |
800W |
|
Switching Capacity |
176Gbps |
|
Maximum stacking number |
up to 9 switches with same IOS feature set in same series |
|
Stack Bandwidth |
480Gbps |
|
Forwarding Performance |
130.95Mpps |
|
FNF (Flexible NetFlow) entries |
Disabled (IP base license required) |
|
Maximum VLANs IDs |
255 |
|
MAC Address Table Size |
32K |
|
CPU |
Multicore CPU |
|
RAM |
4 G |
|
Flash Memory |
2 G |
|
Wireless |
|
|
Number of AP per switch/stack |
100 |
|
Number of wireless clients per switch/stack |
2000 |
|
Total number of WLANs per switch |
64 |
|
Wireless bandwidth per switch |
up to 40Gbps |
|
Supported Aironet AP series |
3600, 3500, 2600, 1600, 1260, 1140, 1040 |
|
Expansion / Connectivity |
|
|
Console ports |
USB (Type-B), Ethernet (RJ-45) |
|
Expansion Slot(s) |
1 network module slot and 1 power redundant slot |
|
Network Modules Selection |
● C3850-NM-4-1G: 4 x 1G uplinks network module |
|
Stacking cable |
●STACK-T1-50CM StackWise stacking cable with a 0.5 m length |
|
Stack Power Cable (recommended) |
●CAB-SPWR-30CM stack power cable with a 30CM length |
|
Power supply |
PWR-C1-1100WAC |
|
Power Device |
Power supply – redundant – plug-in module |
|
Power Redundancy |
optional |
|
Voltage range (Auto) |
100V-240V |
|
Power Consumption of standalone(in Watts) |
143.77 (Max) |
|
Miscellaneous |
|
|
Width |
17.5 Inches (44.5 Cm) |
|
Depth |
19.2 Inches (48.8 Cm) |
|
Height |
1.75 Inches (4.45 Cm) |
|
Weight |
17.6 Pounds (8.0Kg) |
|
Rack Mounting Kit |
optional |
|
MTBF in hours |
241,050 |
|
Compliant Standards |
● IEEE 802.1D Spanning Tree Protoco ● IEEE 802.3 10BASE-T |
|
System software / license |
|
|
System software |
IOS LAN Base (Upgradable) |
|
EnergyWise license |
ENERGY-MGMT, ENERGY-MGT-100-K9 |
|
Software license |
●C3850-48-L-S : LAN Base to IP Base RTU paper license |
|
Access Point Licenses |
●L-LIC-CT3850-UPG: Primary upgrade license SKU for Cisco 3850 wireless controller (e-delivery) |
|
features |
● RPS Support ● IP service-level agreements (SLAs) ● Advanced IP unicast routing protocols ● Jumbo Frames ● VLANS ●Voice Vlan ●VTPv2 ●CDPv2 ●LLDP ● 802.3ad LACP and PAgP ● PVST/PVST+ ● 802.1W/802.1S ●Port Fast/Uplink Fast ●Dynamic Trunking Protocol (DTP) ● port CoS Trust and Override ● Trusted Boundary ● ACL Classification ●ingress Policing ● Auto QoS ● Per VLAN policies ● 802.1p queues ● Scheduling ● Priority Queuing ● Configure CoS Priority Queues ●Configure CoS Priority Queues ● Configure Queue Weights ● Configure Buffers and Thresholds ●Class & Policy Maps ● Modify CoS and DSCP Mapping ● Weighted Tail Drop ● IGMPv1,v2,v3 and MLDv1, v2 ● DHCP server ● DSCP transparency ● HSRP, VRRP, BLGP ● RIPv1, v2 EIGRP, PIM OSPF, OSPFv3,EIGRPv6, BGPv4, IS-ISv4 ● VRF-lite ● PIM-SM/DM, PIM sparse-dense mode, SSM ● Flexible Netflow |
|
Advanced Network security |
● Port security ● DHCP snooping ●Dynamic ARP inspection (DAI) ● IP source guard ●The Unicast Reverse Path Forwarding (uRPF) |
|
Management |
●BRIDGE-MIB ●CISCO-AUTH-FRAMEWORK-MIB ●CISCO-SNMP-TARGET-EXT-MIB ●CISCO-STACKMAKER-MIB |
|
Technical Support and Services |
● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco SP Base Service ● Cisco Focused Technical Support Services |
|
Environmental Ranges |
|
|
With AC power supply Operating environment and altitude |
|
|
Operating temperature up to 5000 ft (1500 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
|
Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF (-5ºC to +40ºC) |
|
Short-term exception at sealevel with single fan failure |
23ºF to 113ºF (-5ºC to +45ºC) |
|
Short-term exception up to 5000 feet (1500 m) |
23ºF to 122ºF (-5ºC to 50ºC) |
|
Short-term exception up to 10,000 feet (3000 m) |
23ºF to 113ºF (-5ºC to 45ºC) |
|
With DC power supply Operating environment and altitude (NEBS) |
|
|
Operating temperature up to 6000 ft (1800 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
|
Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF (-5ºC to +40ºC) |
|
Operating temperature up to 13,000 ft (4000m) |
23ºF to 95ºF (-5ºC to 35ºC) |
|
Short-term exception up to 6,000 feet (1800 m) |
23ºF to 131ºF (-5ºC to +55ºC) |
|
Short-term exception up to 10,000 feet (3000 m) |
23ºF to 122ºF (-5ºC to +50ºC) |
|
Short-term exception up to 13,000 feet (4000 m) |
23ºF to 113ºF (-5ºC to +45ºC) |
|
Short-term exception at sealevel with single fan failure |
23ºF to 113ºF (-5ºC to +45º) |
|
Storage environment |
-40ºF to 160ºF (-40ºC to 70ºC) |
|
Operating altitude |
Up to 13,000 Feet (Up to 4000 Meters) |
|
Storage altitude |
Up to 15,000 Feet (Up to 4573 Meters) |
|
Operating relative humidity |
10% to 95% noncondensing |
|
Storage relative humidity |
10% to 95% noncondensing |
