CAT6 UTP 1427071-6 Network Cable

Cáp mạng Commscope CAT6 1427071-6 (305m/cuộn)

– Cáp mạng AMP cat6 chính hãng
– Hãng sản xuất: AMP – USA (Sau này là Commscope)
– Tiêu chuẩn Mỹ
– Mã hàng quốc tế: 1427071-6
– Cáp mạng AMP chất lượng rất cao, ổn định
– Cam kết đảm bảo chính hãng
– Đóng gói: 305 mét, trọng lượng 15,5Kg
– Chủng loại AMP luôn sẵn trong kho, giao hàng nhanh trong 1 giờ
– Sử dụng cho mạng 10 Gigabit Ethernet

Specifications

Product Classification

Regional Availability Asia
Portfolio NETCONNECT®
Product Type Twisted pair cable

General Specifications

Product Number CS30CM
ANSI/TIA Category 6
Cable Component Type Horizontal
Cable Type U/UTP (unshielded)
Conductor Type, singles Solid
Conductors, quantity 8
Jacket Color Blue
Pairs, quantity 4
Transmission Standards ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E

Dimensions

Cable Length 304.8 m | 1000 ft
Diameter Over Conductor 0.978 mm | 0.0385 in
Diameter Over Jacket, nominal 5.588 mm | 0.22 in
Conductor Gauge, singles 24 AWG

Electrical Specifications

Characteristic Impedance 100 ohm
dc Resistance Unbalance, maximum 5 %
Delay Skew, maximum 45 ns
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency 5.6 nF/100 m @ 1 kHz
Operating Frequency, maximum 250 MHz
Operating Voltage, maximum 80 V
Propagation Delay, maximum 536 ns/100m @250MHz
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Electrical Cable Performance

CS: CommScope

Std: Refers to the standard value listed under Transmission Standards in the Electrical Specifications above
Typ: Typical
IL: Insertion Loss (dB/100m)
NEXT: Near End Crosstalk (dB/100m)
ACR: Attenuation to Crosstalk Ratio (dB/100m))
PSNEXT: Power Sum Near End Crosstalk (db/100m)
PSACR: Power Sum Attenuation to Crosstalk Ratio (dB/100m)
ACRF: Attenuation to Crosstalk Ratio – Far End (dB/100m)

PSACRF: Insertion Loss (dB/100m)
RL: Return Loss (dB)

Frequency IL, STD NEXT, STD ACR, STD PSNEXT, STD PSACR, STD ACRF, STD PSACRF, STD RL, STD TCL, STD ELTCTL, STD
1.00 MHz 2.00 74.30 72.30 72.30 70.30 67.80 64.80 20.00 40.00 35.00
4.00 MHz 3.80 65.30 61.50 63.30 59.50 55.80 52.80 23.00 40.00 23.00
8.00 MHz 5.30 60.80 55.40 58.80 53.40 49.90 46.90 24.50 40.00 16.90
10.00 MHz 6.00 59.30 53.30 57.30 51.30 47.80 44.80 25.00 40.00 15.00
16.00 MHz 7.60 56.20 48.70 54.20 46.70 43.70 40.70 25.00 38.00 10.90
20.00 MHz 8.50 54.80 46.30 52.80 44.30 41.80 38.80 25.00 37.00 9.00
25.00 MHz 9.50 53.30 43.80 51.30 41.80 39.80 36.80 24.30 36.00 7.00
31.25 MHz 10.70 51.90 41.20 49.90 39.20 37.90 34.90 23.60 35.10
62.50 MHz 15.40 47.40 32.00 45.40 30.00 31.90 28.90 21.50 32.00
100.00 MHz 19.80 44.30 24.50 42.30 22.50 27.80 24.80 20.10 30.00
155.00 MHz 25.20 41.40 16.30 39.40 14.30 24.00 21.00 18.80 28.10
200.00 MHz 29.00 39.80 10.80 37.80 8.80 21.80 18.80 18.00 27.00
250.00 MHz 32.80 38.30 5.50 36.30 3.50 19.80 16.80 17.30 26.00

Material Specifications

Conductor Material Bare copper
Insulation Material Polyolefin
Jacket Material PVC

Mechanical Specifications

Minimum Bend Radius Note 4 times the outer cable diameter

Environmental Specifications

Installation temperature -0 °C to +60 °C (-32 °F to +140 °F)
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Storage Temperature -20 °C to +80 °C (-4 °F to +176 °F)
Environmental Space Non-plenum
Flame Test Method CM

Packaging and Weights

Packaging Type Reel in box

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant
CHINA-ROHS  Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance