Vỏ ngoài AP cấp công nghiệp (được xếp hạng IP67) có thể chịu được các điều kiện ngoài trời khắc nghiệt và do đó đơn giản hóa việc lắp đặt và bảo trì thiết bị. RG-AP630 (CD) được trang bị ăng-ten định hướng tích hợp, có thể đạt được vùng phủ sóng Wi-Fi ngoài trời trong điều kiện ngoài trời khắc nghiệt trong phần lớn các tình huống.
AP ngoài trời RG-AP630 (CD) cung cấp năng suất vô song trong nhiều giải pháp mạng ngoài trời.
Tính năng nổi bật của Dòng AP ngoài trời RG-AP630:
- 802.11ac / 802.11ac Hiệu suất không dây vượt trội
- Tích hợp Anten định hướng & Bộ thu sét
- Khả năng thích ứng với môi trường vượt trội (IP67, -40-55 ° C)
Thông sỗ kỹ thuật
Model | RG-AP630(CD) | |
Target Deployments | For big campus, wireless city, harbor, storage room, mine | |
Basic Specifications |
Radio |
Concurrent dual-radio dual-band |
Protocol |
802.11a/b/g/n/ac |
|
Operating Bands |
802.11b/g/n: 2.4GHz to 2.483GHz |
|
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz |
||
(vary depending on countries) |
||
Antenna |
Built-in directional antenna |
|
Antenna Gain |
10dBi |
|
Max Throughput |
300Mbps@2.4G |
|
867Mbps@5G |
||
1.167Gbps per AP |
||
Spatial Streams |
2 |
|
Modulation |
OFDM: BPSK@6/9Mbps |
|
QPSK@12/18Mbps |
||
16-QAM@24Mbps |
||
64-QAM@48/54Mbps |
||
DSSS: DBPSK@1Mbps |
||
DQPSK@2Mbps |
||
CCK@5.5/11Mbps |
||
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM |
||
Receiver Sensitivity |
11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) |
|
11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), – 77dBm(54Mbps) |
||
11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 |
||
11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) |
||
11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) |
||
11ac HT80: -82dBm(MCS0) , -58dBm (MCS9) |
||
Maximum Transmit Power |
27dBm |
|
Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations. |
||
Adjustable Power |
1dBm |
|
IP Rating | IP67 | |
Ports |
Service Port | 1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector); |
1 SFP port (combo with ETH1) | ||
Management Port |
|
|
Power |
Power Supply |
PoE (802.3af) |
Compatible with POE+ |
||
Power Consumption |
<12.95W |
|
WLAN | Maximum clients per AP |
Up to 512 |
SSID capacity |
Up to 14 per radio |
|
Up to 28 per AP |
||
SSID hiding |
Support |
|
Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID |
Support |
|
Remote Intelligent Perception Technology (RIPT) |
Support |
|
X-speed |
Support |
|
Intelligent load balancing based on the number of users or traffic |
Support |
|
STA control |
SSID/radio-based |
|
Bandwidth control |
STA/SSID/AP-based speed control |
|
Preference for 5GHz (band select) |
Support |
|
Wireless position tracking |
Support |
|
Dynamic Frequency Selection(DFS) |
Future Release Support |
|
Security |
PSK, Web, and 802.1x authentication |
Support |
Data encryption |
WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
|
QR code authentication |
Support |
|
SMS authentication |
Support |
|
PEAP authentication |
Support |
|
Data frame filtering |
Whitelist, static/dynamic blacklist |
|
User isolation |
Support |
|
Rogue AP detection and countermeasure |
Support |
|
Dynamic ACL assignment |
Support |
|
WAPI |
Support |
|
RADIUS |
Support |
|
CPU Protection Policy (CPP) |
Support |
|
Network Foundation Protection Policy (NFPP) |
Support |
|
Wireless Intrusion Detection System(WIDS) |
Support |
|
Wireless Intrusion Prevention System (WIPS) |
Support |
|
Routing | IPv4 address |
Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel |
Support |
|
ICMPv6 |
Support |
|
IPv6 address |
Manual or automatic configuration |
|
Multicast |
Multicast to unicast conversion |
|
Management and Maintenance | Network management |
SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
Visualized wireless heat map analysis |
Support |
|
(need to integrate with SNC) |
||
Real-time spectrum analysis |
Support |
|
(need to integrate with SNC) |
||
Fault detection and alarm |
Support |
|
Cloud AC management |
Support |
|
Statistics and logs |
Support |
|
FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
|
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
||
External Characteristics | Lock |
Support |
LED Indicators |
Power status and WDS signal strength |
|
Relevant Standard | Wi-Fi Alliance Certification |
Support |
Safety Standard |
GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22 |
|
EMC Standard |
GB9254-2008, EN301 489, EN55022, FCC Part15 |
|
Health Standard |
FCC Bulletin OET-65C ,EN 50385, IC Safety Code 6 |
|
Radio Standard |
FCC Part15,EN300328, EN301893 |
|
Vibration Standard |
GB/T 2423 |
|
|
Dimensions (W x D x H) (mm) |
276 × 246 × 90 |
Specifications |
Weight |
<2.5kg |
Work Environment | Temperature |
Operating Temperature: -40°C to 55°C |
Storage Temperature: -40°C to 70°C |
||
Humidity |
Operating Humidity: 5% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
||
Installation Mode |
Wall/pole-mount installation |