PowerMAX Red Cat.6 U/UTP Component Level Patch Cord |
DINTEK PowerMAXTM component level Cat.6 Patch Cords are specifically designed to support maximum performance for high speed data networks for 1000mb and 10Gigabit ethernet applications, and are fully tested to meet ANSI/TIA Cat.6 channel requirements.
DINTEK PowerMAXTM patch cords are made from DINTEK’s high quality, unshielded four pair 24AWG stranded patch cable, containing an internal PE cross member. The use of the internal PE cross member maintains consistent separation of pairs in order to maximise the throughput of data.
The patch cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAXTM UTP products be used in a end-to-end system to maximize cabling performance.
Features
- Molded boots prevent pin from bending and cables from kinking
- 24AWG stranded wire provides maximum flexibility
- Brilliant colors make management a snap
- Fully tested to meet ANSI/TIA-568-2.D Cat.6 requirement
- The various colors are available to meet TIA/EIA-606 standards
- The mechanical characteristics and transmission performance meet 16Mbps token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM requirements
Applications
- Patch panel to patch panel connections
- PC to information outlet connections
- Information outlet to telecommunications closet connections
- Equipment & DTE connections
- Voice; T1; ISDN
- 10BASE-T (IEEE 802.3)
- 16Mbps Token Ring (IEEE802.5)
- 100VG-AnyLAN (IEEE802.12)
- 100BASE-T Ethernet (IEEE802.3)
- 155/622Mbps 1.2/2.4 Gbps ATM
- 1000Mbps Gigabit Ethernet
- 550MHz Broadband Video
| Ordering Information | |||||
|---|---|---|---|---|---|
| Product Number | Product Name | Jacket Type | Color | Length Qty | Level |
| 1201-04502 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 0.5m | Component Level |
| 1201-04209 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 1.0m | Component Level |
| 1201-04422 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 1.5m | Component Level |
| 1201-04215 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 2.0m | Component Level |
| 1201-04182 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 3.0m | Component Level |
| 1201-04222 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 5.0m | Component Level |
| 1201-04228 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 10m | Component Level |
| 1201-04284 | Cat.6 U/UTP Patch Cord – T568B | PVC | Red | 20m | Component Level |
| Technical Specifications | |
|---|---|
| Cable Construction | |
| Conductor | |
| Material | Stranded Anneal Copper Wire |
| Wire Size | 24AWG |
| Insulation | |
| Material | PE |
| Thickness | Nom. 0.59mm |
| Diameter | 1.00 ± 0.03mm |
| Colors | Blue/White-Blue | Orange/White-Orange | Green/White-Green | Brown/White-Brown |
| Jacket | |
| Material | PVC, flame retardant CM grade |
| Thickness | Nom. 0.59mm |
| Diameter | 6.0 ±0.2mm |
| Jacket Colors | Gray | Blue | Yellow | Red | Green | Orange | Purple | Black | White |
| Flame rating | CM Style |
| Maximum Tensile Strength | 1.05 kgf/mm2 |
| RJ45 Plug | |
| Housing | Un-shielded RJ45 plug | Housing>polycarbonate |
| Contact Material | Copper alloy 50u” gold plated over nickel |
| Strength | 20lbs. min |
| Durability | 750 cycles min. |
| Wiring schemes | T568B (Standard) – T568A on request |
| Boots | Molded boots prevent pin from bending and cables from kink |
| Electrical | |
| Impedance | 93.8Ω ± 15 Ω |
| Capacitance unbalance pair to ground | max. 330pf/100m Max |
| Spark Test | 2kV in Air |
| DC Insulation Resistance | 500MΩ/100m min. |
| Resistance unbalance | 3% MAX./100m |
| Dielectric Strength | AC-500V/1 Min |
