PowerPRO Blue Cat.5e U/UTP Patch Cord – PVC |
DINTEK PowerPROTM enhanced Cat.5e Patch Cords are specifically designed to support high speed data networks for 100mb and Gigabit 802.3z ethernet applications, and are fully tested to meet TIA/EIA Category 5e channel requirements.
The patch cables are made from high quality shielded four pair 24AWG stranded wire. DINTEK PowerPROTM enhanced Cat.5e patch cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerPROTM UTP products be used in an end-to-end system to maximize cabling performance.
Features
- Molded boots prevent pin from bending and cables from kinking
- 24AWG stranded wire provides maximum flexibility
- Brilliant colors make management a snap
- Fully tested to meet ANSI/TIA-568-2.D Cat.6 requirement
- The various colors are available to meet TIA/EIA-606 standards
Standards Conformance
- UL, ETL Verified
- ANSI/TIA-568-2.D
- ISO/IEC 11801
- CENELEC EN 50173
| Ordering Information | |||||
|---|---|---|---|---|---|
| Product Number | Product Name | Jacket Type | Color | Length Qty | Configuration |
| 1201-03511 | Cat.5e U/UTP Patch Cord | PVC | Blue | 0.5m | T568B |
| 1201-03341 | Cat.5e U/UTP Patch Cord | PVC | Blue | 1.0m | T568B |
| 1201-03603 | Cat.5e U/UTP Patch Cord | PVC | Blue | 1.5m | T568B |
| 1201-03350 | Cat.5e U/UTP Patch Cord | PVC | Blue | 2.0m | T568B |
| 1201-03343 | Cat.5e U/UTP Patch Cord | PVC | Blue | 3.0m | T568B |
| 1201-03359 | Cat.5e U/UTP Patch Cord | PVC | Blue | 5.0m | T568B |
| Technical Specifications | |
|---|---|
| Cable Construction | |
| Conductor | |
| Material | Stranded Anneal Copper Wire |
| Wire Size | 24AWG |
| Insulation | |
| Material | HDPE, FRPE |
| Thickness | min AVG 0.18mm |
| Diameter | 0.97mm |
| Colors | Blue/White-Blue | Orange/White-Orange | Green/White-Green | Brown/White-Brown |
| Jacket | |
| Material | PVC |
| Thickness | Nom. 0.59mm |
| Diameter | 5.50 ±0.2mm |
| Colors | Gray | Blue | Yellow | Red | Green | Orange | Purple | Black | White |
| Flame rating | CM Style |
| Maximum Tensile Strength | 1.05 kgf/mm2 |
| RJ45 Plug | |
| Housing | Polycarbonate |
| Contacts | Copper alloy 50u” gold plated over nickel |
| Strength | 20lbs. min |
| Durability | 750 cycles min. |
| Boots | Molded boots prevent pin from bending and cables from kink |
| Electrical | |
| Impedance | 93.8Ω ± 15 Ω |
| Capacitance unbalance pair to ground | max. 330pf/100m Max |
| D.C.R (Max.) | nom. 14.8 ohm/100m at 20℃ |
| DC Insulation Resistance | 500MΩ/100m min. |
| Resistance unbalance | 3% MAX./100m |
| Dielectric Strength | AC-500V/1 Min |
