PowerMAX+ Cat.6A S/FTP Patch Cord – PVC |
DINTEK PowerMAX+TM Shielded Foil Wrapped UTP Patch Cords are key components of the PowerMAX+TM S/FTP end-to-end solution.
DINTEK PowerMAX+TM S/FTP patch cords are specifically designed to support high speed data networks for 10-Gigabit Ethernet applications and are fully tested to meet ANSI/TIA-568.2-D Cat.6A channel requirements. The patch cables are made from high quality shielded four pair 26AWG stranded wire.
DINTEK PowerMAX+TM patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX+TM shielded products be used in a end-to-end system to maximize cabling performance.
Features
- Component level performance
- Molded boots prevent pin from bending and cables from kinking
- Stranded wire provides maximum flexibility
- Fully tested to meet ANSI/TIA-568.2-D Cat.6A requirements
- The mechanical characteristics and transmission performance meet 10GbaseT Ethernet, 16Mbps token Ring, 10Base-T, 100BaseT, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM
Standards Conformance
- UL Listed
- Meet Cat.6A channel performance for in ANSI/TIA-568.2-D
- CENELEC EN 50173-1, CENELEC EN 50288-10-1
- ISO/IEC 2nd Edition 11801 Class EA
- RoHS-6 Compliant
| Ordering Information | ||||
|---|---|---|---|---|
| Product Number | Product Name | Jacket Type | Color | Length Qty |
| 1201-06033 | Cat.6A 4 Pair S/FTP Patch Cord Component Level | PVC | Gray | 1 m |
| 1201-06036 | Cat.6A 4 Pair S/FTP Patch Cord Component Level | PVC | Gray | 2 m |
| 1201-06034 | Cat.6A 4 Pair S/FTP Patch Cord Component Level | PVC | Gray | 3 m |
| 1201-06035 | Cat.6A 4 Pair S/FTP Patch Cord Component Level | PVC | Gray | 5 m |
| Technical Specifications | |
|---|---|
| Cable Construction | |
| Conductor | |
| Material | Stranded Anneal Copper Wire |
| Wire Size | 26AWG |
| Insulation | |
| Material | Foam-PE |
| Diameter | 1.05±0.05mm |
| Colors | Blue/White-Blue | Orange/White-Orange | Green/White-Green | Brown/White-Brown |
| Drain Wire | 26AWG Tinned Copper |
| Jacket | |
| Material | PVC |
| Diameter | 6.0 ±0.2mm |
| Colors | Gray |
| Foil Material | Aluminum Mylar (Aluminum inward) per pair |
| Foil Coverage | 100% coverage with 25% overlapping |
| Shielding Material | Tinned Copper braid |
| Shielding Coverage | Tinned Copper braid |
| RJ45 Plug | |
| Plug Type | Shielded RJ45 plug |
| Contact Material | Copper alloy 50u” gold plated over nickel |
| Strength | 20lbs. min |
| Durability | 750 cycles min. |
| Wiring schemes | T568B (or T568A on request) |
| Electrical | |
| Impedance | 15Ω/100m at 20℃ |
| Capacitance Unbalance Pair to Ground | 330pf/100m Max |
| D.C.R (Max.) | 14.8 ohm/100m at 20℃ |
| DC Insulation Resistance | 1500MΩ/100m min. |
| Resistance Unbalance | 3% MAX./100m |
